QuestSpecialty Offers Microbial Identification Chart for Proper Disinfecting

BRENHAM, TX – Are you using the proper disinfectant for your facility?  Just because a disinfectant has an EPA registration, it doesn’t necessarily mean it will kill the microorganisms you are most concerned with eliminating. In order to properly disinfect a facility, it is imperative to know the bacteria, viruses, and fungi involved and to use an EPA-registered disinfectant effective against those particular microorganisms.

The EPA registers a disinfectant based on tests which prove the product’s effectiveness on named viruses, bacteria, and fungi. Once effectiveness is verified for particular microorganisms, the manufacturer lists those organisms on the product’s label. Then, it is up to the user to determine if the disinfectant will address the disinfecting need, which is done by matching the listing on the disinfectant’s label with the particular microbe targeted for elimination.

However, matching the scientific names on the product label with the actual microorganism to be eliminated can be a challenge to those who do not hold a scientific degree.

To the rescue is QuestSpecialty’s free Microbial Identification Chart, which lists the most common scientific names for microbes found on disinfectant labels and their association with commonly known infections or the more commonly known names of the microorganisms.

For example, if you are concerned with the spread of pneumonia, you would need a disinfectant with Klebsiella pneumoniae listed on its label. A product that instead lists Canine parvovirus would not be helpful, as that virus is associated with CPV, a highly contagious viral illness affecting dogs.

“It is imperative to use the proper disinfectant to address a facility’s disinfecting needs; however, we noticed many facility managers had difficulty in properly matching the scientific name of a microorganism with the threat they wanted to address,” points out Alex Pratt, lead chemist for QuestSpecialty Corporation. “Many people will use a product that appears to have the most number of claims, thinking it will address any problem they may have.  However, that boils down to using guesswork to eliminate a particular microbial threat.  This chart helps eliminate the guesswork.”

The QuestSpecialty Microbial Identification Chart is available for free download at www.questspecialty.com.

About QuestSpecialty Corporation
QuestSpecialty Corporation, headquartered in Brenham, TX, is a trusted manufacturer of industrial specialty chemicals including aerosols, liquids, powders and wipes for use in sanitary supply, building maintenance, industrial specialties, foodservice and automotive industries. The company manufactures over 400 different products.

Featured

  • CSU Pueblo Installs Solar-Powered Charging Benches

    Colorado State University Pueblo (CSU Pueblo) recently announced that it has installed four solar-powered charging benches from Bluebolt Outdoor, LLC, according to a news release.

  • Midland ISD Starts Construction on Two New High Schools

    The Midland Independent School District recently announced that it will break ground on two new high schools in Midland, Texas, according to a news release. The district is partnering with Pfluger Architects, Lee Lewis Construction, and Satterfield & Pontikes to create a total of over 1.5 million square feet for 8,400 students in grades 9–12.

  • Duncanville High School Breaks Ground on New CTE Building

    Duncanville High School in Duncanville, Texas, recently held a groundbreaking ceremony for the newest addition to its campus, a Career and Technical Education (CTE) facility. The new building is part of a larger CTE expansion project for the school included in a 2023, $170-million bond program.

  • Key Considerations for Office-to-Higher-Education Facility Conversions

    Since the onset of the COVID-19 pandemic, office-to-alternative-use conversions have become a recurring subject of urban development discourse. Office utilization rates across major U.S. cities remain below 50%, with vacancy rates exceeding 27% in San Francisco and 16% in New York. Higher education facilities present programmatic and spatial use cases that align readily with the typical characteristics of commercial office buildings.

Digital Edition