Skip to main content
Add as a preferred source on Google

Trash Disposal

  • By Michael Tuymer
  • 02/01/16

WHY CAN’T I THROW MY LAMPS IN THE TRASH?

Lamps contain mercury and in most cases are considered hazardous. The EPA regulates the management of spent lamps. Most states do not allow hazardous lamps to be disposed in solid waste landfills.

WHY IS MERCURY A CONCERN?

Mercury is a metallic element that can accumulate in living tissue. In sufficient concentrations, mercury may cause adverse health effects. Sources of mercury in the environment from human activity include coal-burning power plants, batteries, and fluorescent and HID lamps. Small amounts of mercury are a necessary component in fluorescent and HID lamps, but when a lamp is broken, crushed or dispensed in a landfill or incinerator, mercury may be released to the air, surface water or groundwater. It is a good policy to keep the mercury out of the solid waste stream by recycling.

HOW DO LAMPS GET RECYCLED?

Whether through a bulk pick-up service, prepaid mail-in containers (UN certified for transit), or drums of crushed lamps using a lamp-crushing machine. The waste will arrive at a certified recycling facility where lamps are fed into a specialized machine for recycling lamps. The entire process is fully automatic and incorporated in a container, thereby preventing mercury from being released into the environment. The phosphor powder is separated in different steps from the glass and metal by-products. Clean glass and aluminum end-caps are separated and stored for reuse. The mercury bearing powder is collected in distiller barrels beneath the cyclone and the self-cleansing dust filters. The powder is then retorted to drive out the mercury. At the end of the process the glass, metal end-caps, powder and mercury can all be reused. Once the materials have been fully processed by the recycling facility, an official certificate of recycling will be produced for your record keeping.

This article originally appeared in the issue of .

About the Author

Michael Tuymer is project manager for Air Cycle Corporation. He can be reached at [email protected] or 800/909-9709.

Featured

  • Utah Valley University Opens New Engineering Building

    Utah Valley University in Orem, Utah, recently held a grand-opening ceremony for the new Scott M. Smith Engineering Building, according to a news release. The facility is one of the largest engineering buildings in the state at almost 200,000 square feet, and it plays home to the university’s Smith College of Engineering and Technology (SCET).

  • LAN, Inc. Opens Office in College Station, Texas

    Lockwood, Andrews & Newnam, Inc. (LAN) recently announced the opening of a new office in College Station, Texas, to support its regional client base, according to a news release. The organization provides engineering, design, and program management services for water, wastewater, transportation, stormwater, and education clients in the Brazos Valley.

  • Different Starting Points, Same End Goal

    Higher education campuses can enhance student experience by implementing mobile credentials to streamline building access, on-campus payments, and access to other amenities. This enables students to connect to their campuses through the technology they use most: their mobile devices.

  • Spaces4Learning Trends & Predictions for Educational Facilities in 2026: Part I

    We asked, you answered, and the results are in! Last year, we put out a call for submissions to collect our readership’s opinion on trends and predictions for K–12 and higher education facilities in 2026.