Duke Energy, Duke University Partner on Innovative Power Project

CHARLOTTE, NC – Duke Energy and Duke University have announced a partnership that will lead to cleaner and more efficient power for the university and the surrounding community.

Under a proposed 35-year agreement and subject to approval by the North Carolina Utilities Commission (NCUC), Duke Energy Carolinas proposes to own, build and operate a 21-megawatt (MW) natural gas combined heat and power (CHP) facility on the Duke University campus in Durham.

If approved, the plant would use the waste heat from generating electricity to produce thermal energy and steam needed for the university, making it one of the most efficient generating assets in the Duke Energy generation fleet. The electric power would be put back on the Duke Energy electric grid to serve the university and nearby customers.

“This project will provide a cleaner and more diverse energy mix for the community and provide the value of thermal energy for the university,” says David Fountain, Duke Energy North Carolina president. “The innovative approach provides multiple benefits to a large customer like Duke University and is a cost-effective generation asset for Duke Energy and our customers in North Carolina.”

In addition to 21 megawatts of power, the facility would be capable of producing roughly 75,000 pounds per hour of steam, which would be sold to Duke University for heating water, among other things. The CHP facility would be connected to an existing Duke Energy substation located on the campus, which serves the university and its medical center as well as other customers.

“This partnership will provide value for Duke University and will accelerate our progress towards climate neutrality,” says Duke University's executive vice president Tallman Trask III.  “By combining steam and electricity generation systems, we can increase efficiency and reduce our overall consumption by millions of units of energy each year, and have a positive effect on the community at large.”

By displacing the current electricity mix and boilers currently serving the university, the project would lower energy-related carbon dioxide emissions at Duke University by about 25 percent. In the future, the project could also be used to isolate the critical loads on the campus, providing a method to increase reliability to hospitals and clinics as additional grid back up.

Duke Energy Carolinas will file with the NCUC for a Certificate of Public Convenience and Necessity for the project. If approved, the project — around $55 million — is expected to come online in 2018.

Duke Energy and Duke University are separate organizations — both with a connection to noted businessman James B. Duke (1856-1925).

About CHP
Sometimes referred to as cogeneration, CHP systems generate electricity and useful thermal energy in a single system. Heat that is normally wasted in conventional power generation is recovered -- avoiding the losses that would otherwise occur. CHP systems are more efficient than doing the same tasks with separate systems.

“Advancements in the technology make this type of system attractive to other large customers with similar power and related-energy needs,” adds Fountain. “We are excited to offer this service.”

About Duke Energy
Headquartered in Charlotte, NC, Duke Energy is a S&P 100 Stock Index company traded on the New York Stock Exchange under the symbol DUK.

About Duke University
Duke University consistently ranks among the leading institutions of higher education in the world. Duke educates 6,500 undergraduate and 8,500 graduate and professional students in ten schools and colleges, and has more than 160,000 alumni. While Duke’s campus is situated on nearly 9,000 acres in Durham, the university’s reach includes partner institutions in Singapore, China and many other countries.  With more than 36,000 faculty and staff in the university and health system, Duke is the second-largest private employer in North Carolina.

Featured

  • Fellowes Launches New 3D Modular, Product Configurators

    Contract interiors and architectural solutions provider Fellowes recently announced the launch of new 3D modular and product configurators for several of its product lines, according to a news release. The new products offer SIF file integration and pricing for the Volo, Markerboards, Sena, and Rising product lines in connection with 3D Cloud, which provides 3D product visualization and 3D digital asset management.

  • Austin International School Library Renovation

    Established in 1999, the Education Design Showcase is a vehicle for showing off innovative — yet practical — solutions in planning, design, architecture, and construction. The Austin International School has been recognized with an EDS 2025 Grand Prize award in the category of Renovation.

  • Springfield Breaks Ground on $53.7M Pipkin Middle School Rebuild

    Construction is underway on a new, state-of-the-art Pipkin Middle School in Springfield, Mo., a major step in Springfield Public Schools’ (SPS) long-term facility improvement plan, according to local news. The $53.7-million project officially broke ground in early June, following years of planning and community input aimed at modernizing aging infrastructure and addressing student capacity concerns.

  • New Jersey PreK–12 School Breaks Ground on New STEM Building

    Saddle River Day School (SRDS) in Saddle River, N.J., recently announced that it has broken ground on the new Dr. Kristen Walsh Hall of Science & Entrepreneurship, according to a news release. The school partnered with DIGroup Architecture for the design of the new facility, which will provide the school with space to expand its STEM and business education classes.

Digital Edition