What Cleaning Contractors Should Know About Ozone Generators

One of the most challenging issues cleaning contractors must deal with is malodor eradication. Often, even once the source of the odor has been removed, odors persist because they have penetrated carpets, wall coverings, furniture, etc.

One of the fastest, most effective, and safest ways to tackle persistent malodors is with an ozone generator. However, contractors must know that ozone can be hazardous to people, plants and pets. They should not be present when an ozone generator is in use. U.S. Products, a manufacturer of ozone generators, also believes cleaning contractors should know the following about ozone generators:

  • The source of the odor must first be removed for the ozone generator to be effective.
  • Ozone machines oxidize odor-producing particulates, leaving behind pure oxygen; in most cases this means the odor is completely eliminated.
  • Areas where an ozone machine is in use should be sealed off.
  • Ozone generators are most effective at removing tobacco and fire odors as well as odors caused by paint, garbage, mold or mildew.
  • Ozone machines are not effective at removing dust particulates from the air, filtering the air or removing smoke.
  • Ozone machines do not mask odors, they eliminate them.
  • Ozone generators can be used in schools, offices, and hospitals, boats, cars and recreational vehicles.
  • Select a machine with adjustable ozone output levels; some odors may require a higher ozone output than others.
  • For enhanced safety, the machine should have a programmable timer that turns the machine off at a specific time.
  • Usually ozone machines need at least 30 minutes to work effectively, however this can vary depending on the extent of the odor problem or the size of the area in which it is used.

“While contractors should use care when using ozone generators,” says Bob Abrams, carpet care expert and product manager for Nilfisk-Advance commercial business, “they should also know that used properly, ozone generators can be very effective at odor removal.”

This article originally appeared in the issue of .

Featured

  • Myrtle Grove Elementary

    Phased Construction Keeps Students on Campus During Rebuild

    When Escambia County School District needed to replace most of Myrtle Grove Elementary School in Pensacola, Fla., it had three distinct challenges: honor the school's legacy in the community, bring state-of-the-art learning environments to the county, and be seamlessly built on the same site as the active school campus.

  • FGCU Breaks Ground on New Health Sciences Building

    Florida Gulf Coast University (FGCU) has launched construction on a major new academic facility that leaders say will reshape healthcare education in Southwest Florida for decades to come, according to university news.

  • Baton Rouge Center for Visual and Performing Arts

    Baton Rouge Center for Visual and Performing Arts

    Established in 1999, the Education Design Showcase is a vehicle for showing off innovative — yet practical — solutions in planning, design, architecture, and construction. The Baton Rouge Center for Visual and Performing Arts has been recognized with an EDS 2026 Project of Distinction award in the category of New Construction.

  • Secret to Efficient, On-Time School Infrastructure & Modernization Projects is All in the Preparation

    Warmer weather and longer days make summer the ideal time for construction and modernization projects at educational facilities. School boards and construction firms must coordinate effectively to ensure that these projects do not extend even a single day into the school year and impede classroom operation.