Skip to main content
Add as a preferred source on Google

Minnesota Districts Implement SafeWood Designs Bullet-Resistant Products

  • By Matt Jones
  • 06/24/22

Following last month's elementary school shooting in Uvalde, Texas, K–12 districts around the U.S. are turning their attention once again to security measures that can protect students. Local news reports that Minnesota K–12 school districts are reviewing products from SafeWood Designs, which manufactures bullet-resistant products for schools, including doors, wall panels, hardware systems, furniture, and even whiteboards.

“Our number-one goal in designing these products was to keep our kids safe while they are at school, plain and simple,” said Jason Horner, CEO of SafeWood Designs, Inc. “And, at the same time, maintain the everyday look and feel kids are used to in their schools. We believe we have accomplished our goal.”

Some Minnesota schools are reviewing options like bullet-resistant dry erase boards and tack boards. “At the bottom of the shutter, there’s a pin that locks into the floor, and it becomes, effectively, a shield and a place to stand,” said SafeWood Designs’ Tim Ganser of the dry erase board.

“The whole idea of school protection is to protect the hallways with our wall panel and protect the classrooms with a bullet-resistant door to shutter,” Ganser said. “Our hope is that if they’re installed in a classroom, they’re using it as a tool for the classroom. If there’s one unfortunate time that something does happen, they have the protection they need.”

A press release notes that SafeWood uses a three-zone approach to enhance and maximize student protection. Threshold Zone 1 consists of the primary entrances; Threshold Zone 2 is the second line of protection should the entrances be breached; and Threshold Zone 3 should be “a safe space designed to withstand a constant and prolonged attack,” the release said.

“Being proactive is key. We strongly encourage legislators to consider funding for bullet-resistant systems. If every classroom incorporated a bullet-resistant safe zone, it would not only offer protection when it’s most needed—but also offer additional, precious time for authorities to arrive," said Horner.

About the Author

Matt Jones is senior editor of Spaces4Learning and Campus Security and Life Safety. He can be reached at [email protected]

Featured

  • Armstrong World Industries Acquires Parallel Architectural Products

    Armstrong World Industries, provider of interior and exterior architectural applications, recently announced that it has acquired the Colorado-based Parallel Architectural Products, according to a news release.

  • Illinois State University Breaks Ground on College of Fine Arts Transformation

    Illinois State University in Normal, Ill., recently held a groundbreaking ceremony for the Wonsook Kim College of Fine Arts transformation project, according to university news. The series of new constructions and renovations will upgrade spaces in Centennial East, the Center for the Visual Arts, and the Center for the Performing Arts, as well as replace the existing Centennial West facility with a new Commons Building.

  • North Carolina District Completes New Elementary School

    The Wake County Public School System (WCPSS) in Holly Springs, N.C., recently announced that construction on a new elementary school has finished, according to a news release. Rex Road Elementary School measures in at 133,000 square feet and is the fifteenth school that general contractor Balfour Beatty has completed for the district.

  • Northeastern University Breaks Ground on New Housing Community

    Northeastern University recently announced the groundbreaking of a new student housing community on its campus in Boston, Mass., according to a news release. The university is partnering with American Campus Communities (ACC) for development of the project, which will have the capacity for 1,200 students and has a scheduled completion date of fall 2028.