Skip to main content
Add as a preferred source on Google

What Does It Take To Add Gunshot Detection Services To Your Facility?

  • By Allan Overcast
  • 05/01/18

You will need to look at your facility and identify what classrooms, hallways, entrances, and exits that you need covered. Decide how many sensors you need. Each sensor will detect within a certain range, for example 2500 square feet. Indoor sensors will generally be placed in hallways and entrances at an absolute minimum because statistics indicate that shootings occur or start in the entrances or hallways. In businesses you’re going to want to place sensors in areas where people congregate the most, because if a crime is going to be committed it generally will be focused in an area that has a larger populace. Examples would be in a lunch room or in a large open atrium area where a lot of your coworkers hang out.

The second consideration is, are you adapting your existing alarm panel or are you going to have to put in an additional network system to support the sensors? Some sensors have integrated contact closures that can tie directly into your alarm panel, therefore minimizing the need for an additional new system. You also need to determine how you want the message to go out. Look for sensors can send IP message notification over SMS, email, and other notification means.

In conclusion, when considering a gunshot detection system for your facility, the main focus should be the size of your facility, the number of sensors that you want to put in those facilities in the high-traffic areas, and the message notification style whether it’s alarm panel integration or and/or if it includes IP message notification.

This article originally appeared in the School Planning & Management May 2018 issue of Spaces4Learning.

About the Author

Allan Overcast is owner/CEO of Shot Tracer Technologies, Inc. (www.shottracer.com). He can be reached at [email protected] or 866/636-8867.

Featured

  • El Paso District Breaks Ground on New Elementary School

    The Canutillo Independent School District in El Paso, Texas, recently announced that construction has begun on a 119,000-square-foot elementary school, according to a news release. The district partnered with Pfluger Architects, Carl Daniel Architects, and LDCM Solutions on the new Davenport Elementary School, which has an expected completion date of 2027.

  • Spaces4Learning Launches 2026 Education Design Showcase Awards

    Spaces4Learning has opened submissions for the 2026 Education Design Showcase! The awards program launched in 1999 with the goal of celebrating innovative, practical solutions in the planning, design, and construction of K–12 and higher-education facilities. EDS recognizes new developments that help achieve optimal learning environments, as well as the architecture firms that brought the ideas to life.

  • Upcoming University of Alabama Performing Arts Center Hits Construction Milestone

    The University of Alabama in Tuscaloosa, Ala., recently celebrated the topping out of its new Smith Family Center for Performing Arts, according to a news release. The university is partnering with HPM for program and project management on the facility, which broke ground in 2023 and is scheduled for completion in November 2026.

  • Kimball International Releases Curated Design Support Program

    Commercial furnishings company Kimball International recently announced the launch of a new end-to-end design support program, DesignSuite. According to a news release, its goal is to guide architecture & design professionals and dealer partners through the process from vision to specification.