Skip to main content
Add as a preferred source on Google

Tackle High Dusting With a Vacuum

  • By Marvin Mauer
  • 07/01/19

People tend to notice the cleanliness of surfaces immediately around them like desks, floors, and shelves. They don’t necessarily look up and consider the cleanliness of light fixtures, windowsills, and overhead air ducts. Janitorial professionals know that dust in high places can end up falling onto surfaces where people work, play, and eat. This particulate may become airborne and is easily inhaled into the lungs.

That’s where high dusting tools really change the conversation. Adding extension wands to a vacuum can add 10 to 12 feet of reach, bringing many surfaces within reach. Unless completely ignored, the traditional approach to cleaning high places is either with a ladder and some sort of dusting tool or the utilization of a scissor lift. High dusting tools allow janitors to vacuum these areas with two feet safely on the ground.

Putting someone on a ladder to clean is a potential health and safety hazard. It is the employer’s responsibility to take every reasonable precaution and train janitors on the proper use of a ladder to ensure they are used correctly, thus reducing the risk of serious injury from a fall. With the right high dusting tools added to a vacuum, this risk is mitigated as anyone can clean with both feet safely on the ground.

There’s so much more to vacuum than just floors—be they carpeted or hard surface. By pairing high dusting tools with a vacuum, it can be safer, easier, and more convenient to clean just about anywhere.

This article originally appeared in the College Planning & Management July/August 2019 issue of Spaces4Learning.

About the Author

Marvin Mauer is the Canadian country manager for ProTeam® (proteam.emerson.com/en-us).

Featured

  • Architectural Power for the Modern Campus Landscape

    For generations, an outdoor classroom only required a textbook and a patch of grass. Today, not only has the laptop replaced the printed pages, the rise of agile learning has turned campuses into study halls with students listening to lectures and researching topics from quads, gardens, and plazas. The challenge for architects and facility managers is to provide connectivity without cluttering the landscape with visual eyesores or creating safety hazards with extension cords.

  • Rhode Island Boarding School Completes Student Dorm Renovations

    St. George’s School in Middletown, R.I., recently announced the completion of a $26-million renovation project on Arden-Diman-Eccles Dormitory, according to a news release. The school partnered with Voith & Mactavish Architects (VMA) on the new space, which places a new focus on collaborative community spaces open to both boarding students and day students.

  • Construction Begins on New University Research Vessel

    Boat-building company All American Marine recently announced that it has begun construction on a new catamaran research vessel for the University of Texas Marine Science Institute (UTMSI) in Port Aransas, Texas, according to a news release.

  • Northeastern University Breaks Ground on New Housing Community

    Northeastern University recently announced the groundbreaking of a new student housing community on its campus in Boston, Mass., according to a news release. The university is partnering with American Campus Communities (ACC) for development of the project, which will have the capacity for 1,200 students and has a scheduled completion date of fall 2028.