Everything Old Is New Again

As I look back through our archives at some of the most significant trends in education, it is interesting to note that what seems like a new problem or a new idea most likely is not. Chances are that if you look back in history, you will see an older version of that “new” idea. Sometimes the idea sticks. Occasionally we find ourselves doing a complete 180.

Sustainability — On April 22, 1970, we celebrated the first Earth Day, putting air and water pollution and other environmental concerns on the front page. The sustainability movement took hold in the building and construction industry some 20 years later (1993) when the USGBC was established; the LEED rating system was unveiled in 2000. The Center for Green Schools was launched in 2010. Today, building sustainable schools is routine practice.

Energy and Design — With the OPEC oil embargo of 1973, oil prices jumped 350 percent. Through the early 1980s numerous articles were written on making schools more energy efficient. New mechanical systems were installed. Large windows, prevalent in older buildings, were closed off to save on heating and cooling costs. What wasn’t taken into account was the negative impact this would have on natural ventilation, light and the indoor-outdoor connection. Current research shows the positive effect of natural light on students. Windows are being added and historic windows are being restored.

Science and Technology — In 1957 the talk was about the Soviet Union, Sputnik, the space race and how American students were falling behind in math and science. Our strategy was to emphasize math and science and to expand vocational programs. The focus quickly faded. Fast-forward to the 2000s when global rankings, the economy and workforce development took center stage, and there was a renewed emphasis on what we now called S.T.E.M. Outside factors — jobs, and the idea that the U.S. has “fallen behind” — have been the drivers of this movement. The real driver should be our belief that students need the ability to think critically, problem-solve and collaborate to succeed.

Open Classrooms and Makerspace — In the ’60s and ’70s it was all about the open classroom. In the ’80s it was back to basics and the open classroom idea died. Today it is once again about active learning and collaboration, makerspaces where students can create and a focus on student-centered learning. My question is not so much about the space, but how we are training teachers to use it. We will need to say tuned to see if it sticks this time around!

This article originally appeared in the issue of .

Featured

  • Beeville ISD Starts Construction on New Elementary School

    The Beeville Independent School District near Corpus Christi, Texas, recently began a construction project that will consolidate two existing, aging schools into a new elementary school, according to a news release. The district is partnering with Pfluger Architects and Spawglass General Contractors for the design and construction, respectively, of the new facility.

  • ProTeam Launches GoFit 6 HEPA Backpack Vacuum

    Technology leader Emerson recently introduced the new ProTeam GoFit 6 HEPA backpack vacuum, according to a news release. The vacuum was designed to capture 99.97% of particulates down to 0.3 microns—including atmospheric hazards like lead dust, mold spores, and other particulates—through an advanced filtration system.

  • Abstract colorful arrows in front of a contemporary university building

    Spaces4Learning 2025 Trends in Higher Education

    With 2025 well underway, it’s time to take a look at some broader trends submitted by you, our Spaces4Learning readership. We asked for your thoughts on topics like classroom design, health & safety, materials & construction, and technology in both K–12 and higher-education environments. Below is a roundup of 2025 trends in higher education from the experts in the trenches.

  • University of Kentucky Integrates New Cleaning Technology

    The University of Kentucky in Lexington, Ky., recently installed a new cleaning system designed to improve cooling efficiency on campus, according to a news release. The Facilities Management’s Utilities and Energy Management Unit installed new chiller tubes into two of the chillers at the university’s Central Utility Plant.

Digital Edition