Kingsport HS Gets Science and Tech Center Facelift

  • By Dian Schaffhauser
  • 08/22/19

Tennessee's Dobyns-Bennett High School has opened a new three-story science and technology center that fronts the high school and adds more than 70,000 square feet.

Tennessee's Dobyns-Bennett High School has opened a new three-story science and technology center that fronts the high school and adds more than 70,000 square feet.

Perkins&Will served as the architect and BurWill Construction did construction. Furniture was purchased from WorkSpace Interiors through a Sourcewell cooperative purchasing agreement. The design process for the new center began in earnest in 2016 with several "visioning" sessions involving high school teachers and staff members.

The goals for the project included:

  • Addition of an "enhanced" science and technology program at the high school, with new facilities and programming, that could accommodate more students;
  • Redefinition of the school's main entrance;
  • Improvement in circulation and accessibility for students and staff; and
  • Use of the addition to rebrand the high school.

Now, when students enter the school, they arrive in a giant atrium where a massive video wall greets them, suspended above a counter that can accommodate a dozen students working side-by-side.

The new facility raised the high school’s capacity to support 2,500 students at 85 percent utilization.

"We weren't just aiming to add classrooms — we were aiming to add learning spaces," Principal Chris Hampton told a local reporter. The design incorporated:

  • 18 science/tech labs;
  • Two teacher work spaces;
  • Six student work spaces;
  • A technology-enhanced active learning lab;
  • A large research lab;
  • Four small research labs;
  • A student café; and
  • Administrative offices.

The new facility raised the high school’s capacity to support 2,500 students at 85 percent utilization.

The new center includes what is being referred to as a "double layer of security." Guests will be buzzed into a foyer area and then need to be granted additional access to gain entry to the learning areas, where students are.

The County Commission approved a $140 million bond issue in 2017, which covered the more than $20 million project for the high school, among other school capital projects in the region.

About the Author

Dian Schaffhauser is a former senior contributing editor for 1105 Media's education publications THE Journal, Campus Technology and Spaces4Learning.

Featured

  • Ancient Resilience: How Indigenous Intelligence Shapes the 4Roots Education Building

    As climate change intensifies, educational spaces must evolve beyond basic sustainability toward true resilience – we must design environments that can adapt, respond, and thrive amid shifting, and intensifying, climate hazards. Drawing on indigenous wisdom and nature-based strategies, integrating resilient design offers a path to create learning environments that are not only functional but deeply in tune with their natural surroundings.

  • Image courtesy of MiEN Company

    6 Ways to Pull Off a Major District Construction Project

    Designing and building a large-scale project on a K–12 campus is a monumental undertaking that requires the right blend of ideas, funding, design and execution to get it right. The process also relies on multiple partners, each of which has to handle its respective aspect of the project while also keeping the district’s broader mission and goals in mind.

  • New Jersey PreK–12 School Breaks Ground on New STEM Building

    Saddle River Day School (SRDS) in Saddle River, N.J., recently announced that it has broken ground on the new Dr. Kristen Walsh Hall of Science & Entrepreneurship, according to a news release. The school partnered with DIGroup Architecture for the design of the new facility, which will provide the school with space to expand its STEM and business education classes.

  • California District Starts Construction on New Robotics Facility

    The Fremont Union High School District (FUHSD) near Silicon Valley, Calif., recently announced that construction has begun on a new Robotics Facility on the campus of Cupertino High School, according to a news release. The 14,500-square-foot facility will serve students at high schools across the entire district, providing purpose-built spaces for student creativity and collaboration.

Digital Edition