Energy-Efficient Lighting

Classroom lighting has advanced far beyond a couple of rows of fluorescents and an on/off switch. Now, when you’re planning classroom lighting, the first consideration is the ability to create the proper learning environment for the students and their teachers. The second consideration is energy savings.

It’s when you successfully marry those two goals that you’re looking at what has become the future of green lighting for schools. Such is the case of Indiana’s Maple Glen Elementary School.

According to Joe Montalone, Maple Glen’s principal, the Westfield Washington Schools are among the three fastest growing school districts in that state. As a matter of fact, all three districts are in the rapidly emerging suburban communities surrounding Indianapolis.

Westfield Washington’s oldest school is a mere 12 years old, while Maple Glen itself is only in its second year. So, when the elementary school was in the design and engineering stages, they took a good, hard look at the lighting systems that had been used previously.

Greg Stephens, director of engineering for Indianapolis-based Mussett, Nicholas & Associates, Inc., which served as the consulting engineers on the Maple Glen project, said earlier buildings had premium light fixture packages. While those fixtures provided great light distribution and quality with no glare, they were “extremely energy intensive.”

In addition to energy efficiency, the school district wanted a system that would stand up for the long term, said Rick Phillips, Westfield Washington’s executive director of human resources, who worked on the Maple Glen project. The system had to be durable, easy to maintain, operate quietly, and create a good learning environment.

Sensors, Switches, and Energy Savings

Industry trends for the development of high-performance lighting in schools have been driven by research on the effects of lighting in the classroom. The research showed that poor lighting caused headaches, eye strain, and fatigue, at a cost of reducing student and teacher productivity.

The other cost is monetary. Lighting alone accounts for about 40 percent of a school’s utility bills, said Marc McMillan, director of marketing for education for Finelite, Inc.

Research by the California Energy Commission resulted in the development of best practices for classroom illumination, McMillan explained. Organizations, such as the Collaborative for High Performance Schools (CHPS) and Leadership in Energy and Environmental Design (LEED), have integrated these best practices into their school classroom standards.

Proper lighting should provide teachers with the flexibility to create the appropriate environment for each classroom activity and incorporate overhead lighting, which provides uplighting that’s reflected by the ceiling, as well as downward lighting. With only the downward lighting on, energy usage is reduced by half. Separate fixtures could light just the whiteboards in the classroom.

Since every classroom is situated on an outside wall, teachers can manually manipulate the amount of daylight entering their classroom with switches that control the lighting system and the blinds on the classroom windows. Montalone commented that this allowed the teachers to leave the lights in audio-visual mode most of the time.

The switch panels control all of the lighting functions, and there are two sets of switches in each room — one set by the door to the classroom and the other by the teacher’s desk for easy access.

A major energy saver is the occupancy detector mounted in the ceiling. If it detects no movement in the classroom for a period of 15 minutes, it automatically shuts off the lights. However, the “quiet time” switch on the control panel will keep the lights on for a period of one hour, bypassing the occupancy detector.

How much money does the new lighting system save the school? According to Stephens, energy savings are projected to be about $6,000 per year.

Featured

  • Springfield Breaks Ground on $53.7M Pipkin Middle School Rebuild

    Construction is underway on a new, state-of-the-art Pipkin Middle School in Springfield, Mo., a major step in Springfield Public Schools’ (SPS) long-term facility improvement plan, according to local news. The $53.7-million project officially broke ground in early June, following years of planning and community input aimed at modernizing aging infrastructure and addressing student capacity concerns.

  • ProTeam Launches GoFit 6 HEPA Backpack Vacuum

    Technology leader Emerson recently introduced the new ProTeam GoFit 6 HEPA backpack vacuum, according to a news release. The vacuum was designed to capture 99.97% of particulates down to 0.3 microns—including atmospheric hazards like lead dust, mold spores, and other particulates—through an advanced filtration system.

  • California High School Starts Construction on New CTE Building

    Analy High School, part of the West Sonoma County Union High School District (WSCUHSD) in Sebastopol, Calif., recently broke ground on a new Career Technical Education (CTE) Building, according to a news release. The 15,000-square-foot facility will offer specialized facilities for students in engineering, welding, culinary arts, agricultural sciences, and design thinking.

  • modern college building with circuit and brain motifs

    Anthropic Introduces Claude for Education

    Anthropic has launched a version of its Claude AI assistant tailored for higher education institutions. Claude for Education "gives academic institutions secure, reliable AI access for their entire community," the company said, to enable colleges and universities to develop and implement AI-enabled approaches across teaching, learning, and administration.

Digital Edition