Combined Schools Boost Sustainability

While the Beavercreek School District initially retained SHP Leading Design to design and engineer two separate new schools — a 92,000-square-foot elementary school for 700 students and a 163,000-square-foot middle school for 1,150 students — additional planning and research revealed that a combined campus could realize a number of advantages while still giving both schools a separate identity and feel.

The combined, 50-acre campus that opened in 2013 offers numerous economies of scale advantages. It eliminated the need to develop two separate sites and construct separate access roads and turn lanes, and made it possible to share a physical plant, HVAC system, kitchen, technology infrastructure and maintenance staff . A shared quadrangle both unites and separates the schools, which have their own dining areas, gymnasiums, administrative offices, playground areas and parking lots to help them achieve the two-school feel the district required.

Energy-efficient construction methods and materials were used throughout to help ensure the new schools would operate efficiently from day one and in the future. An independent energy audit of the new campus revealed that the district will realize $150,000 in electricity savings annually, earning a record $492,000 energy rebate from Dayton Power & Light (DP&L). The rebate, combined with an $86,768 DP&L rebate for energy efficiency improvements at six existing buildings, brought total rebates earned by Beavercreek from DP&L to $578,819 which represents the largest energy rebate in the utility company’s history.

High efficiency measures in the Beavercreek City Schools building program included the following.

  • A geothermal heating and cooling system that uses the earth as a source of heat in the winter and cooling in the summer. The closed-loop system is expected to deliver up to 30 percent in energy savings over conventional heating and cooling systems, with payback for the additional cost of the system expected in less than 10 years.
  • Insulated Concrete Form (ICF) walls that make up the structure of the building. The system of rigid, insulated foam blocks are reinforced with steel and filled with concrete. ICF walls have a high thermal resistance value, and the insulation they provide reduces heat loss and contributes to further energy savings.
  • Daylight harvesting that utilizes high windows to allow daylight to penetrate deep into classrooms, where the light level is monitored and artificial lights are adjusted as appropriate. This technique requires less artificial light and cooling, minimizing both electrical and cooling demands.
  • Sloped ceilings were incorporated into the design of classrooms to allow natural light to be better reflected and retained.
  • Solar tubes lined with highly reflective material were installed; these tubes lead and transport natural light from roof skylights into interior spaces, which provide more natural lighting and greater energy savings.
  • Triple-glazed glass windowpanes that are separated by an air-filled space to reduce heat transfer and increase insulation efficiency.
  • Occupancy sensors and daylighting controls that detect whether a space is being used and turn lights on or off automatically so energy output can be minimized at all times.

This article originally appeared in the issue of .

About the Authors

Known for his passionate dedication to his work, Jeff Parker, AIA, ALEP, LEED AP, is an expert at helping school districts create future-focused learning environments. His 25+ years of experience include educational visioning, master planning, designing and programming for numerous educational facility types. He says, “From designing spaces that transform the way education takes place, to gathering district stakeholders to help them cast a vision for their new spaces… all of the work I do is done with the purpose of redefining learning.” Contact Jeff at [email protected].

Jim Messner is an associate and the director of Engineering with SHP Leading Design in Cincinnati. He has been involved in school design for nine years.

Featured

  • Springfield Breaks Ground on $53.7M Pipkin Middle School Rebuild

    Construction is underway on a new, state-of-the-art Pipkin Middle School in Springfield, Mo., a major step in Springfield Public Schools’ (SPS) long-term facility improvement plan, according to local news. The $53.7-million project officially broke ground in early June, following years of planning and community input aimed at modernizing aging infrastructure and addressing student capacity concerns.

  • ProTeam Launches GoFit 6 HEPA Backpack Vacuum

    Technology leader Emerson recently introduced the new ProTeam GoFit 6 HEPA backpack vacuum, according to a news release. The vacuum was designed to capture 99.97% of particulates down to 0.3 microns—including atmospheric hazards like lead dust, mold spores, and other particulates—through an advanced filtration system.

  • California High School Starts Construction on New CTE Building

    Analy High School, part of the West Sonoma County Union High School District (WSCUHSD) in Sebastopol, Calif., recently broke ground on a new Career Technical Education (CTE) Building, according to a news release. The 15,000-square-foot facility will offer specialized facilities for students in engineering, welding, culinary arts, agricultural sciences, and design thinking.

  • modern college building with circuit and brain motifs

    Anthropic Introduces Claude for Education

    Anthropic has launched a version of its Claude AI assistant tailored for higher education institutions. Claude for Education "gives academic institutions secure, reliable AI access for their entire community," the company said, to enable colleges and universities to develop and implement AI-enabled approaches across teaching, learning, and administration.

Digital Edition