Easy Wireless Access Control

Wireless Access Control at Penn State

Tyco Security Products provided Penn State a seamless solution when it came time for a system-wide upgrade of wireless locks and IP cameras.

The Pennsylvania State University, better known as Penn State, is a public research university with a network of 24 campuses, including nine with on-campus residence halls.

As part of a system-wide upgrade the eight residential campuses under the domain of Commonwealth Campus Housing and Food Services, began the move to a single security and event management platform to support their video and access control systems, including a new system of wireless locks and upgraded IP cameras for the residence halls and some outside group facilities such as childcare and student centers.

Penn State, with its myriad campuses across Pennsylvania, was operating on multiple and disparate platforms for its academic and physical security systems. They wished to use Tyco Security Products’ Software House C•CURE 9000 software as the standard security management platform integrated among the University and its campuses.

The switch to wireless locks improved the ability for programming and monitoring while also providing easier operational use. The wireless locks, which are mounted on the residence room doors, communicate with a STANLEY Wi-Q portal gateway — there are about 90 within the system — which in turn communicate with the C•CURE 9000 software.

“The student population had a tendency to lose the keys that they needed to open doors, so a wireless solution would make it easier for the appropriate students to gain access,” says Tracy Walker, assistant director of Commonwealth Housing, Food Services and Residential Life. The same card that accesses the wireless room locks throughout the campuses also works for card readers for copiers, laundry machines and cash registers.

The STANLEY Wi-Q wireless locks offered a tracking piece that regular keys couldn’t provide and without having to rely on conventional locking systems, the campuses could cut down on the need for locksmiths and having to change out cores at the door.

www.tycosecurityproducts.com

This article originally appeared in the issue of .

Featured

  • Moline-Coal Valley School District to Consolidate Two Schools into New Facility

    The Moline-Coal Valley School District in Moline, Ill., recently broke ground on a new elementary school that will consolidate the students and staff from two existing schools, according to local news. Robert Ontiveros Elementary School will serve as the new home for Lincoln-Irving Elementary School and Willard Elementary School.

  • Tennessee Middle School Completes Health, Life Safety Renovations

    The Giles County Board of Education in Pulaski, Tenn., recently announced that a series of renovation projects has been completed at Bridgeforth Middle School, according to a news release. The district partnered with Wold Architects & Engineers and Brindley Construction to modernize building systems at one of the district’s oldest schools.

  • Cal Poly Humboldt Starts Construction on Healthcare Education Hub

    California State Polytechnic University, Humboldt in Arcata, Calif., recently announced that work has begun on a renovation project that will turn the Stewart Building into a new Healthcare Education Hub, according to a news release. The university is partnering with Sundt Construction Inc. for construction services.

  • Deferred Maintenance Issues Growing at Universities, Gordian Reports

    U.S. colleges and universities are falling increasingly behind on facilities maintenance and repair, according to Gordian’s 13th annual State of Facilities in Higher Education report. The deferred capital renewal burden has reached $156 per gross square foot, an 8% increase over the previous year.