Skip to main content
Add as a preferred source on Google

How Can We Minimize Germs in Restrooms?

  • By Will Haas
  • 01/01/17

Avoiding contact with germs in restrooms is an important health topic, particularly during the winter months when cold and flu illnesses are prevalent. To start, frequent and thorough hand washing is a must when it comes to stopping the spread of germs. That means washing vigorously with soap and water for at least 20 seconds and drying thoroughly. Setting water temperature at a comfortable warm temperature (roughly 100°F or 38°C) will help support the hand washing process. Posting signage with friendly reminders about hand washing near sink areas, and verbal reminders from teachers, including “hand washing breaks” before snacks and lunch can also help reinforce hand washing habits.

Regular restroom maintenance checks are also mandatory. These check-ins should ideally include cleaning and sanitizing of commonly touched surfaces — faucets, sinks, partition latches and entrance doors. It’s also important to restock soap and paper towels to help ensure hands can be completely cleaned and dried.

As for restroom design and products, touchless fixtures help minimize touchpoints on germridden restroom surfaces. In 2011, University of Colorado researchers examined the microbial biogeography of public restroom surfaces and found that the hand washing process was responsible for significant bacterial exposure, as soap dispensers contained even more bacteria than toilet seats. Using sensor-operated faucets, flush valves, soap dispensers, hand dryers and paper towel dispensers will reduce germ contact and cross-contamination from users’ hands.

In addition, consider lavatory units made of non-porous sustainable materials that do not support microbial growth. Also look for units that feature seamless molded construction, so there are no cracks and crevices for germs and dirt to build up. Lavatory countertops and sinks that employ a smooth and seamless contoured or linear design are also very easy to wipe down.

This article originally appeared in the issue of .

About the Author

Will Haas is a product manager for Bradley Corporation. He can be reached at 800/BRADLEY or www.bradleycorp.com.

Featured

  • URI Cuts Underwater Ribbon on New Ocean Robotics Laboratory

    The University of Rhode Island recently held a ribbon-cutting ceremony for a new Ocean Robotics Laboratory at its Narragansett Bay Campus, according to a news release. Two students used a remotely operated vehicle to cut an underwater ribbon in a 30-by-20-foot test tank.

  • University of Kentucky Reopens Scovell Hall

    The University of Kentucky recently reopened Scovell Hall, part of the Martin-Gatton College of Agriculture, Food and Environment (CAFE), following comprehensive renovations to the 120-year-old facility in Lexington, Ky., according to a news release.

  • California District Opens New Robotics Center

    The Fremont Union High School District (FUHSD) in Cupertino, Calif., recently held a Grand Opening ceremony for a new, district-wide Robotics Center, according to a news release. The 14,500-square-foot facility was designed by Quattrocchi Kwok Architects (QKA); Landmark Constructors served as the builder and Blach Construction as general construction manager.

  • Houston-Area High School Receives Best Project Award from ENR

    Tomball West High School near Houston, Texas, recently received a K–12 Education Best Project Award in Engineering News-Record’s 2026 Texas & Southeast Best Projects Awards, according to a press release. The new facility was completed in May and opened its doors to students for the fall 2026 semester.